MA017-01 • 01/14/14
1.888.830.1326
5
Installing the globe (sold separately)-
Position the indentations in the outer rim of
the globe so that they line up with the tabs
on the inside surface of the light xture rim.
Carefully lift the globe up inside the light
xture as far as it will go. Rotate the globe in
a clockwise direction until it is held tightly
in place by the four tabs.
Indentation
Tab
ON
Turn Power
Installing the pull chain pendant -
Attach the pull chain pendant to the
end of the short chains coming from the
switch housing and the light kit.
Turn power on. Your installation
is complete!
TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)
7
6
8
Installing the bulbs - Install a bulb into each
of the sockets. When necessary, replace with
bulbs of same type and wattage.
Bulb
Socket
5
