101
OTHER RECORDING FUNCTIONS
2.
Use [̆], [̄], [̇], and [̈] to move the
selection boundary to the image you want to
view, and then press [SET] to display the
selected image.
• This displays the image with an indicator (like “ ”)
that shows the recording method used, along with a
value indicating the image number in the series.
3.
Use [̇] and [̈] to scroll between images.
IMPORTANT!
• Pressing [PREVIEW] after a normal speed, multi
continuous shutter mode, or single-image operation
displays the last image recorded only.
• Pressing [PREVIEW] does not display preview
images if any of the following conditions existed
immediately before recording of images using the
high speed continuous shutter mode or auto
bracketing.
— Immediately after turning on camera power
— Immediately after changing the mode dial setting
— Immediately after recording a new image without
high speed continuous shutter or auto bracketing.
• The selection screen does not appear following a
high speed continuous shutter mode operation that
records only one image.
