Operation
Legend™ 412Z User Manual Rev. 1 -11-
This setting starts the products test sequence.
·
Go to the Auto Test main level.
This setting allows you to control the fan speed.
1. Go to the Fan Mode main level.
2. Select the desired speed (Low, High, or Auto).
· When in AUTO, the fan speed automatically changes so the product’s temperature
does not exceed the maximum allowed value.
· When in the other settings, the fan speed follows the predefined values.
· The internal controller will override any manual setting if the internal temperature
rises above a certain level.
This setting allows you to choose a particular DMX personality.
1. Go to the Channel Mode main level.
2. Select the desired personality (15chan, 27chan, 31chan, or 34chan).
· See the DMX Values section for the highest starting address you can select for each
personality.
· Make sure that the starting addresses on the various products do not overlap due to
the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX controller. All
products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the starting address:
a. Go to the DMX Address main level.
b. Select the starting address (001–512).
The highest recommended starting address for each DMX mode is as follows:
DMX Personality DMX Address DMX Personality DMX Address
