Clarity Visual Systems
September 1999
74
6. The electronics turn
on the DLP engine
and start sending
data to it
If there is video present on
the selected source (see
Source Select in menu), the
video image will be displayed
If there is no video present,
the message “SOURCE
ABSENT” will be displayed.
Menus can be accessed and
settings saved and changed
Menu can be selected, but no video is
present
• Make sure that the correct source is
selected in the menu
• Verify that the Curtain option in the menu
is not on
• Check the video cable connections
• Contact your service provider
SOURCE ABSENT message is displayed
• Select the correct source in the
SOURCE SELECT menu
• Verify that the video cables are plugged
in
• Verify that the source and cable are
outputting a video signal using the same
cable and source on another display
• Contact your service provider
No menu or video can be displayed
• Replace the remote batteries and/or
remote
• Check the lamp
• Contact your service provider
