2-8 Using the Projector
Part Number: 191443-001 - Writer: JGilbert - Saved by: J Abercrombie
Pages: 9 Words: 1439 Saved date: 05/17/004:43 PM File Name: Ch02
Special On-Screen Messages
Special on-screen messages will appear on the projection display to
identify the following conditions:
■
Check Video Cable:
Indicates the video cable may not be
plugged into the projector or the selected video input is not
accurate.
■
Input Signal Out of Range—
Indicates the projector is unable
to access the appropriate input signal.
■
2 Inputs Active - Remove One—
The projector has two data
inputs: one is an analog D-Sub input and the other is a digital
DFP input. This message indicates that both inputs are active
simultaneously and the user should detach one of them.
NOTE:
This message appears only when the Multimedia
Adapter is not attached to the projector.
■
Going to Standby—
Indicates the projector is entering a sleep
mode or is powering off the lamp.
■
Lamp May Fail Soon, Replacement Suggested—
Indicates the
lamp is approaching failure. The message will remain on the
screen for five seconds or until the on-screen menu
Select
button is pressed.
