PRODUCTSPECIFICATIONS
Pressure Washer Specifications
Pressure ..................... 3,800 PSi
Flow Rate..................... 4.0 GPM
DetergentMix ................. Useas directed
Water Supply Temperature....... Not to exceedIO0°F
PumpOil Capacity.............. 12 fl. oz. (0.35 I)
Engine Specifications
RatedHorsepower............... 13 at3600 rpm
Bore .......................... 3.5in.(88 ram)
Stroke ......................... 2.5 in.(64 ram)
Displacement................... 23.7in.(389 cc)
SparkPlug
Resistor .................... NGKBPR6ES
SetGapTo: ................... 0.028-0.031in (0.70-0.80
ram)
IntakeValveClearance............ 0.15 _+0.02 mm (cold)
ExhaustValveClearance........... 0.20 _+0.02 mm (cold)
FuelCapacity ................... 1.72Gallons
OilType ....................... SAE10W-30
This pressurewasher is rated in accordanceto the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testingand Rating Performanceof PressureWashers).
OWNER'SRESPONSIBILITIES
Followthe hourly or calendar intervals, whichever occurs
first. Morefrequent service is requiredwhen operatingin
adverse conditions noted below.
Maintenance Schedule
[i[ i[ i[i[i[[[ [ [ [ [ [ [ [ [[ [ [ [ [ [ [[[
• Changeengine oil
2
3
4
5
• Check/clean water inlet screen1
Checkhigh pressure hose
• Checkdetergentsiphoning hose
• Checkspray gun and assembly for leaks
• Cleandebris
• Checkair filter
• Checkengine oil level
[ [[[ iii [[[[[[[[
• Cleanair filter'
} }: }: } [ t : ii }f}}: }: }:}: }} } } } } } } } } } } } } } } } } } } } } } }_
• Changeengine oil
• Cleansediment cup
• Check/adjustspark plug
• Servicespark arrester1
• Cleanfuel tank and filter
-- =
• Changepump oil_
):):) ))))):):)):):) ))))))))))))))))))))))))
• Replaceair filters
• Replacespark plug
• Checkadjust idle speed'
• Checkadjust valve clearance_
[_J JJt[
• Cleancumbustion chamber'
tLtLtLt i_ }[iJ[ 1iLL: J[ [ [[i[[ [ [[[ ij[ [ [j[ [ [iij[ [ Li}iL LJL LLLLL L L L L L L L L L L L
• Checkfueltube (replaceif necessary)'
Cleanif clogged. Replaceif perforated or torn.
Service more often under dirty or dusty conditions.
Replacepaper element only.
These items should beserviced by your servicing dealer.
Changeafter first 50 hours of operation and then every 200 hours or 3 mooths,
whichever occurs first.
14
