Cypress CY3640 USB Starter Kit
User’s Guide
Cypress Semiconductor Ver 0.993
Page 14
•
Connect the device programmer to your PC's serial port using the serial cable
•
Turn it on by plugging the wall power adapter
•
Copy the programming software executable on the floppy disk to your PC's hard disk and
run it. At startup the software will detect the presence of the programmer connected to
the serial port and perform self-test
•
Insert your Cypress USB controller into the DIP adapter and choose the appropriate
commands from the programmer software
The programming software is actually quite simple; however, it provides all the necessary
functions to program a USB controller, such as blank check, read, program, verify and security
fuse programming. The software is able to read and write .BIN and .HEX format files. To erase
the code programmed in the windowed USB controller devices, use regular UV EPROM erasers
available on the market.
Adding your own logic
See “Appendix D” for a description of the items that you may change to modify your design.
