Normal timer recording
functions
MORE
◆
For timer recordings, clock, date, and stations must be set correctly.
◆
Load a cassette with its safety tab in place
(see page 13) and with sufficient free space for the recording.
Call the video’s "MAIN MENU",
choose "Timer Program".
Decide if you want to record
"One Time", "Daily" or "Weekly"
... and confirm.
If you wish to make changes:
Move to the position you want to
change using the / buttons.
Change the setting using the PR+/- or
number buttons.
If all setting are ok, press or , till
you see “OK : confirm” in the bottom
line.
Confirm.
Switch your video off.
Type in one after the other:
◆ The programme location
number,
◆ the time the broadcast starts,
◆ the time the broadcast ends,
◆ the day of the broadcast, if it
is not today.
◆ Select LP if you wish to make
a very long recording
(only for
DV-K480)
.
◆ Wait a few seconds after typing an one-digit-number.
◆ If you have made a mistake, move to the position you want to change
using the / buttons and change the setting.
◆ If programme timings overlap, the machine will give an warning
message. If you don’t adjust the times, the machine will record the first
programme completely then continue with the second one.
◆ If there is no sufficient free space for the recording on the cassette the
video switches automatically to “LP” for double recording capacity.
(only for DV-K480)
◆ The recorder will eject cassettes which have the safety tab removed
(page13).
