![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/1d/31d1e04b-a312-4dbd-9399-28f03a1fae27/31d1e04b-a312-4dbd-9399-28f03a1fae27-bga.png)
10
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Dell Corresponding Part Number
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.2.1.1 Dimensions/Weight
The AP has the following physical dimensions:
120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")
255 g (9 oz)
2.2.1.2 Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna (internal)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.2.1.3 Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 3- AP-93 Indicator LEDs
Initial power-up condition
Device booting, not ready
Ethernet Network Link
Status / Activity
Ethernet link unavailable
10/100Mbs Ethernet link
negotiated
1000Mbs Ethernet link negotiated