12 PowerConnect B-FCX Switch Hardware Installation Guide
53-1002267-01
Hardware features
1
FIGURE 14 System status LEDs
SFP
(1F~4F)
Link or
Activity
On/Flashing Green The SFP port has established a valid 100/1000 Mbps link.
Flashing indicates the port is transmitting and receiving user
packets.
Off A link is not established with a remote port.
SFP+
(1F~4F)
Link or
Activity
On/Flashing Green The SFP+ port has established a valid 10 Gbps link. Flashing
indicates the port is transmitting and receiving user packets.
Off A link is not established with a remote port.
1System status LEDs
TABLE 12 System status LEDs
LED Condition Status
PS1
PS2
(Power Supply
Status)
Green Power supply is operating normally. It is installed properly and the
power cord is attached to a power source.
Amber Power supply fault. The power supply may not be installed properly.
Off Power off or failure.
Diag
(Diagnostic)
Flashing Green System self-diagnostic test in progress.
Green System self-diagnostic test successfully completed.
Amber System self-diagnostic test has detected a fault. (Blower, thermal or
any interface fault.)
Out-of-band
Management
Link or Activity
On/Flashing Green The port has established a valid link at 10/100/1000 Mbps.
Flashing indicates the port is transmitting and receiving user
packets.
Off A link is not established with a remote port.
TABLE 11 Port status LEDs (Continued)
LED Condition Status
Reset
1
PS
2 Diag
Console
Mgmt
1
