584 VLAN Commands
protocol vlan group
Use the protocol vlan group command in Interface Configuration mode to
add the physical unit/port interface to the protocol-based group identified by
groupid
. A group may have more than one interface associated with it. Each
interface and protocol combination can be associated with one group only. If
adding an interface to a group causes any conflicts with protocols currently
associated with the group, this command fails and the interface(s) are not
added to the group. Ensure that the referenced VLAN is created prior to the
creation of the protocol-based group except when GVRP is expected to create
the VLAN.
To remove the interface from this protocol-based VLAN group that is
identified by this
groupid
, use the no form of this command.
If you select all, all ports are removed from this protocol group.
Syntax
protocol vlan group
groupid
no protocol vlan group
groupid
•
groupid
— The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a physical port interface to the
group ID of "2."
