A SERVICE OF

logo

Open as PDF
next previous
15
SELF-DIAGNOSIS
Theappliancehasaselfdiagnosissystemtoidentifyanumberofmalfunctions.
Error messages are displayed on the appliance display.
IF ... IS DISPLAYED, ...WHAT SHOULD I DO?
Low Temperature
(frost prevention)
Theapplianceisttedwithafrostprotectiondevicetoavoidexcessiveformation
ofice.Theappliancestartsupagainautomaticallywhenthedefrostingprocessis
completed.
High Level
(internal tray full)
Emptytheinternalsafetytankfollowingtheinstructionsinthesection“Endofseason
operations”.Ifitreoccurs,contactyourlocalauthorizedservicecenter.
Change filter
Whenthismessageisdisplayed,thewaterlterneedsreplacingasdescribedinthe
section:“Replacingthelimescalelter”.
IF ... IS DISPLAYED, ...WHAT SHOULD I DO?
Probe Failure
(sensor damaged)
If this is displayed, contact your local authorized service center.
Failure1
WhentheF1alarmisactive,theappliancecontinuesfunctioningnormallyinair-air
mode.
Toresetthealarm,unplugtheappliancethenpluginagain.
If the alarm reoccurs frequently, contact customer services.