Delta 33-830 Manual

A SERVICE OF

next previous

10

Fig. 11

Fig. 12

Fig. 13

Fig. 14

REMOVING BLADE AND

BLADE GUARD FROM SAW

1. DISCONNECT TOOL FROM POWER SOURCE.

2. Loosen blade guard clamp knob (A) Fig. 11, and

rotate blade guard (B) to the position shown.

3. With wrenches supplied (C) Fig. 12, loosen arbor nut

(D) as much as possible. NOTE: Arbor nut has left

hand threads.

4. Lift cam (E) Fig. 13, which holds the blade guard (B)

Fig. 12, in position and move the blade guard (B), outer

blade flange (F), and blade (G) outward.

5. Lift blade guard (B) Fig. 14, and remove arbor nut

(D), outer blade flange (F), and blade (G). Then remove

blade guard (B).

A

B

B

F

C

G

D

E

B

G

F

D