xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual
download sim_ms
Purpose Used to download firmware or configuration file to an indicated
device.
Syntax
download sim_ms [firmware | configuration] <ipaddr>
<path_filename> {[members <mslist 1-32> | all]}
Description This command will download a firmware file or configuration file to a
specified device from a TFTP server.
Parameters firmware – Specify this parameter to download firmware to members
of a SIM group.
configuration_from_tftp - Specify this parameter to download a switch
configuration to members of a SIM group.
ipaddr – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which to
download firmware or switch configuration files. The user may specify
a member or members by adding one of the following:
Restrictions Only administrator-level users can issue this command.
• <mslist 1-32> - Enter a value, or values to specify which
members of the SIM group will receive the firmware or switch
configuration.
• all – Add this parameter to specify all members of the SIM
group will receive the firmware or switch configuration.
Example usage:
To download firmware:
DES-6500:4# download sim_ms firmware 10.53.13.94 c:/dgssri.had members all
Command: download sim_ms firmware 10.53.13.94 c:/dgssri.had members all
This device is updating firmware. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
DES-6500:4#
To download configuration files:
249
