536
Practical hints
Changing bulbs
5
̈ Insert a screwdriver or similar imple-
ment at the side and carefully pry off
lens
1 in the direction of the arrow.
̈ Turn bulb holder 2 in the direction
of the arrow and remove it together
with the bulb.
̈ Remove bulb 2 from the bulb hold-
er.
̈ Press the new bulb into bulb
holder
2.
̈ Screw bulb holder 2 together with
the bulb into the lens.
̈ On vans and crewbuses, reattach the
lens together with bulb holder
2.
Identification lamps 12V 4CP
(cargo vans only)
1 Securing screw
̈ Remove screw 1 and remove the
lamp housing.
̈ Press the bulb into the socket, turn it
counterclockwise and remove it
from the holder.
̈ Press the new bulb into the bulb
holder and screw it in clockwise.
̈ Carefully reattach the lamp housing
and retighten screw
1.
nf_BA.book Page 536 Friday, January 25, 2008 3:53 PM
