Dynojet Research 250iP Manual

A SERVICE OF

next previous

Air Brake and EEC Kit Installation Guide for 200i/250i and 200iP/250iP Motorcycle Dynamometers

AIR BRAKE AND EEC KIT

Air Brake

6

10 Remove the two 5/16-inch bolts and washers securing each of the carriage clamps

and shims and set aside.

11 Remove the three carriage clamps and shims and set aside.

12 Remove the two 5/16-inch bolts and washers securing the nut block and shim and

set aside.

13 Remove the nut block and shim and set aside.

14 Remove the six 1/4-20 x 5/8-inch pan head screws securing the center panel to the

dyno carriage and set aside.

15 Remove the center panel and set aside.

Figure 4: Removing the Center Panel

screw

center panel

carriage

clamp

washer

bolt

shim

nut block