56
Signal frequency response:
10kHz
Interrupt link:
Sofware selectable from IRQ2, 3, 7, 10, 11, 12, 15
Digital Inputs/Outputs
Number of lines:
16 Input and 16 Output Lines
Compatibilty:
TTL
Input Voltage:
Logical Low: 0.1V to 0.8V
Logical High: 2V to 5V
Output Voltage: Logic 0: 0.45V max
Logic 1: 2.4V min
Output Current:
Low State (V
OH
): 24mA max
High State (V
OL
): -2.6mA max
Max Darlington drive current:
24mA on each Output line
Absolute Maximum TTL Inputs
Absolute Max Input voltage:
5.4V*
Absolute Min Input voltage:
-0.2V*
II
Warning
Stresses greater than listed above may cause permanent damage to the PC
62C. This stress rating only applies to the PC 62C at these or any other
condition above those indicated in the operational section of this specification
is not implied. Exposure to absolute maximum rating conditions for extended
periods of time may affect device reliability. We do not recommend exposure
to absolute maximum ratings.
I/O Connector
Opto-Isolator Input Connector:
37 D-type Male
Digital I/O Connector:
40 way IDC header
Max User +5V current:
250mA (at I/O connector)
Max User +12V current:
250mA (at I/O connector)
