A SERVICE OF

logo

Open as PDF
next previous
11
The Burners
The burner caps and crowns can be removed for cleaning.
Wash the burners caps and crowns using hot soapy water, and remove marks with
a mild paste cleaner. A well moistened soap impregnated steel wool pad can be
used with caution, if the marks are particularly difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
The Ignition electrode
The electric ignition is obtained through a ceramic electrode and a metal electrode
(Fig. 1 - C). Keep these components very clean, to avoid difficult lighting, and check
that the burner crown holes (Fig. 1 - B) are not obstructed.