I. Getting Started
1.1 Turn on/off
1.1.1 Turn on
To start your tablet, press and hold the power key for 2 seconds. The Ematic
logo indicates that the tablet is loading.
Once the lock screen loads, drag the padlock icon to the right to unlock.
1.1.2 Turn off
When the tablet is on, to shut off your tablet, press and hold the power key
until the System options dialog appears and tap Power Off, then your tablet
will shut down dialog appears. Tap OK.
1.2 Lock/unlock the screen (sleep mode)
To save battery, you should put your tablet in sleep mode by turning off the
LCD display. To do this, press the power key and immediately release it. Do
it again to bring up the lock screen.
1.3 Connect to a computer
1.3.1 Connect to PC via USB cable
1. Connect the tablet to your computer by USB.
2. The device driver will install.
You can now copy files onto the tablet just as you would with a USB flash
drive.
3. Remove the USB cable when you finish transferring files.
1.3.2 Connect to Mac® via USB cable
1. Connect the tablet to your computer by USB.
