Introduction 9
Status and Data lights
The print server has two lights (Status and Data), which indicate
the current operating status of the print server when you first turn
on the printer, during normal operation, and when errors occur.
The Status light has three colors (red, green, and orange). The Data
light is green.
The status lights indicate the print server status, as follows:
Status sheet button
The first time you use the print server after installing or
reinstalling it, turn on the printer while holding down the status
sheet button for about ten seconds to initialize the print server.
The length of time needed to hold down the status sheet button
varies depending on the printer model.
Status light Data light Print server status
Red On Initializing
Red flashing On Error status
Red Status light and green Data light
flashing alternately
Firmware update mode
Green On Ready (10M link)
Green Flashing Receiving packets (10M link)
Orange On Ready (100M link)
Orange Flashing Receiving packets (100M link)
