A SERVICE OF

logo

Open as PDF
next previous
Chapter 1 Product Overview
33
1
Paper Specifications
Type Normal paper (single-ply only)
Size (H × L) 68 ∼ 120 mm {2.68 ~ 4.72 in} × 120 ∼ 235 mm {4.72 ~ 9.25 in}
Thickness 0.075 ∼ 0.2 mm {0.003 ∼ 0.008 in} (single-ply only)
Weight 60 ∼ 120 g/m
2
{16 ∼ 32 lb}
• Make sure that the paper has no curl, folds (especially at the top edges), warps, or
wrinkles. Otherwise a paper jam may occur.
• Since the paper sensors use a translucent photo sensor and reflective photo sensor, do
not use paper that has holes or translucency at the sensor position as shown in the fig-
ures below.
<Back>
<Front>
Area where holes and
translucency are prohibited.
Area where holes are
prohibited and the reflection
rate of the paper surface
must be 40% or more.
45
35
35
45
30
15
For multi feed models
[Units: mm]
<Back>
<Front>
45
35
35
45
30
15
17
7
17
7
For single feed models