RS232-RS485 Convertor Manual V1.02 28/06/01
vii
Associated Product Documentation
This manual provides a detailed description of the ‘RS-232 to RS-485 Convertor’ hardware
only. For detailed information about the systems in which this module is used and the
associated hardware modules and software support products, please refer to the sources of
information listed in the table below.
Hardware:
Product Documentation
PRO101 Programming System Overview \ Getting Started Manual
PRO104/108 Programming
System
Overview \ Getting Started Manual
PPM Module Reference Manual
PPM Firmware Update
Instructions
User Manual
ISP Interface Module Reference Manual
RS-232 to RS-485 Convertor User Manual
ISP Connections for Atmel AVR
and AT89S Microcontrollers
Please refer to separate Application Articles for each device family.
Software:
EQTools Installation and Getting Started Guide
EQTools Help file
ISP-PRO Installation and User Manual
EQTools/ISP-PRO – Error
Messages
Reference Manual
- Updated on a regular basis – please download the latest version
from our Web Site.
Labview – Remote Application
Control
User Manual
Describes how to control the PPM using a custom Labview (from
National Instruments) application.
Remote Application Control User Manual
Describes how to control the PPM using a custom Remote
Application written in e.g. Visual Basic, C++, C Builder, Delphi etc.
Downloading up-to-date documentation and software:
In line with our policy of continuous improvement, the software and associated
documentation for this product are updated on a regular basis. Please refer to the ‘ISP
Support Page’ at www.equinox-tech.com/isp.htm for the most up-to-date information for this
product.
