Toddler Bed Assembly
• Stand the headboard assembly upright, as shown.
• Push down on the top of the headboard to secure it to the
right and left side panels.
Helpful Hint: If you are having difficulty securing the
headboard to the left and right side panels, position the
assembly against a wall (with the molded moon, sun
and star toward the wall). Push down on the top of the
headboard to secure it to the left and right side panels.
• Turn the headboard assembly backward,as shown.
• Position the metal frame with the straight ends downward,
and the curved ends pointing forward, as shown.
• Insert the metal frame straight ends into the grooves in the
left and right side panels.
9
• Position the headboard on a flat surface with the molded
moon, sun and star facing up.
• Position the right side panel with the R facing the
headboard.
• Fit the pegs on the headboard into the slots in the right
side panel.
• Repeat this procedure to attach the left side panel to the
headboard.
• Locate the holes in the metal frame, near the middle.
• Position a mattress retainer so that the arrow is pointing
up and is over the hole on the inside of the metal frame
assembly.
• Insert a barrel nut through the mattress retainer and into the
inside of the metal frame.
• Insert a 1
1
/
4
" screw into the outside of the metal frame and
hand tighten the hardware.
• While holding the barrel nut in place with a Phillips screw-
driver, tighten the screw with the other Phillips screwdriver.
Do not over-tighten.
• Repeat this procedure to attach the other mattress retainer
to the other side of the metal frame.
Mattress Retainer
Headboard
Right Side Panel
Left Side Panel
Headboard
Left Side Panel
Right Side Panel
Metal
Frame
Headboard
Straight End
Groove
Right Side Panel
Left Side Panel
35
#10 – 24 x 1
1
/
4
" Screw
Shown Actual Size
Pegs
Slots
Metal Frame
