A SERVICE OF

logo

Open as PDF
next previous
21
Replacing the hard drive in the hard drive kit
www.gateway.com
Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
To replace the hard drive in the hard drive kit:
1 Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in “Preparing your notebook”
on page 7.
2 Turn your notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 8.
4 Remove the hard drive kit by following the instructions in “Replacing the
hard drive kit” on page 18.
Phillips #0 screwdriver
2 chrome 2.5 × 4.7 mm
(hard drive kit)
2 chrome 3.0 × 3.5 mm
(hard drive kit bracket)