Safety Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Consumer Support
Secure the Window and Install the Window Side Gasket
Attach the window stopping clips on the top
and the bottom of the window frame (sliding
windows only).
Cut the foam window side gasket to the
proper length and stuff it between the 2
windows.
B
A
Install the Air Conditioner in the Window
Cut two pieces of adhesive back foam seal to
the height of the window opening. Remove
the backing and apply to the vertical inside
edges of the window frame and the sliding
window that will rest against the air
conditioner. Cut one piece to the width of
the window opening and apply to the top
inside edge of the window frame.
Slide the air conditioner onto the support
platform. Be sure the side channel butts
against the vertical side edge of the
window frame.
Drill two 1/8″ holes in the window channel
frame through the existing holes in the
bottom bar. Screw 2 type C screws through
these holes.
NOTES:
■
If the air conditioner does not fit securely, remove it and
readjust the leveling bolt.
■
Make sure the air conditioner is firmly anchored to the
window channel frame.
C
B
