Care and Cleaning
Glass Canopy Hood
Glass
canopbt
Cleanwith a damp, soapg cloth and drg with a
clean cloth.A glass cleaner mag also be used.
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, usewarm
sudsg water or a stainless steel cleaner or polish.
Alwags wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
Toinquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest gou, pleasecall our toll-free
number:
NationalParts Center 800.626.2002
monogram.corn
Light bulbs
To change the light bulbs:
1. Removethe inner lamp lens cover bg inserting a
small flat blade screwdriver into each of the three
slots and gentlg prging it free.
NOTE:Do not remove the outer trim ring (lamp
assemblg).
2. Graspthe bulb and pull it straight out.
3. Replacewith the same wattage, tgpe and size
bulb.Wear Gloves. Do not touch bulb with gout
bare fingers.
These 12 volt, 20 watt halogen bulbs with a G4
base are available at specialtg lighting stores and
home building centers.
NOTE:IfWRONGWATTBULBappears in the
displag, the wrong kind of replacement bulb has
been used. Replacewith the same wattage, tgpe
and sizebulb as the one removed.
4. Replace inner cover bg inserting the three
retaining tabs into the three slots and pressing
them firmlg in place.
_0
remove the inner lamp lens cover.
Bulb
Outertrim ring
(lamp assembly)
Do not remove
I I I
Removable inner
lamp lenscover
NOTE: Makesure the tabs are inserted into the slots.
