1
INTRODUCTION
Description
The GS 750
plus
is a state of the art 30-inch (762mm) wide
plotter designed for use with the GRAPHIX ADVANTAGE
system and other sign design systems.
Note: When used with GRAPHIX ADVANTAGE systems, the
GS750
plus
requires GRAPHIX ADVANTAGE 4.3 or higher. When
GS 750
plus
is used with other sign design systems, contact the
system manufacturer to obtain a driver for the GS750
plus
.
The GS750
plus
features Gerber's exclusive Knife Mode
Switching™ Technology, which offers the operator a choice of two
cutting modes selectable from the plotter keypad:
! Tangential Knife Mode keeps the blade aligned with the
direction of plotting motion for cutting thick materials such as
sandblast resist and for pouncing patterns.
! Swivel Knife Mode is used for rapid cutting of all but the most
demanding materials such as sandblast stencil. Gerber's
exclusive Corner Correcting Technology™ assures sharp,
easy-to-weed corners in swivel knife mode.
Performance
The GS750
plus
is designed to precisely register graphics up to 50
yards long using carbide blades for crisp, sharp cuts.
When used with the GRAPHIX ADVANTAGE, the GS750
plus
uses
the Plot Spooler feature to receive and plot files while the operator
continues to design at the system.
