GPX TD1510 Manual

next previous

GPX | TD15106

GETTING STARTED  SETTING UP YOUR TELEVISION

Connecting a Cable or Satellite Receiver or RF Antenna

Auto Scanning for Channels

Basic Features

Youwillneed:CoaxialCable,anOver-the-Airor

StandardAntenna.

Connect the antenna’s output to the TV Antenna

Input on the television.

PowerthetelevisiononandpresstheSource

Button to switch to TV Mode.

Afteryouhaveconnectedthetelevisiontoapower

sourceandanantennaorcablesource,pressthe

Power Button to turn the tv on.

Press the Source Button to switch to TV Mode.

Press the Menu Button to access the televisions

preferencesandsetupmenu.

Press the TVNavigationButtons(▲/►/▼/◄/

Enter) to select the Channel preferences.

AdjusttheAir/Cable setting to air if you have

hookedupanantenna,orcableifyouhavehooked

up a cable or satellite receiver.

Press the

TVNavigationButtons(▲/►/▼/◄/

Enter) to select Auto Scan.

Over-the-Air Antenna

Standard Antenna

Channel +/- Buttons

Presstoadjustthechannelofthetelevision.

Volume +/- Buttons

Presstoadjustthevolumeofthetelevision.

Number Keypad

Enterinanumbertogotothatspecicchannel.

The number entered must match the channel

number exactly.

Mute Button

Press to mute the television.

TV Menu Button

PresstoaccesstheTV’spreferencesandsetup

menu.

TVNavigationButtons(▲/►/▼/◄/Enter)

Press to navigate the TV’s on-screen menus.