REAR-FACING INSTALLATION WITH LATCH
12
1
7
6
5
4
3
2
LATCH belt must be routed through opening in
child restraint for
rear-facing mode.
(see page 29, fig. d
Belt must lay flat and not be twisted.
Adjust child restraint to recline position
(see fig. a and page 25, fig. g0LACE
rear-facingONVEHICLESEATEQUIPPEDWITH
LATCH anchors.
For ease of installation, extend
LATCH belt to its
maximum length.
(OOKCONNECTORSTOVEHICLELOWERANCHORS
(fig. b). Pull connectors to be sure they are
securely attached to the anchor points. (fig. c).
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINT
while pulling
LATCH adjustment belt. (fig. d).
0ULLFRONTTOBACKANDLEFTTORIGHTATBELTPATH
TOCHECKFORSECUREINSTALLATION(fig. e)4HE
CHILDRESTRAINTSHOULDNOTMOVESIDETOSIDEOR
FORWARDMORETHANINCHCM
#HECKTHATTHELOWERANCHORAGEBELTSTAYS
tight and does not slip from the tightened
position. If it does not stay tight, try another
SEATINGPOSITIONORCONTACT#USTOMER3ERVICE
#HECKLEVELINDICATORONCHILDRESTRAINT
Vehicle mustBEONLEVELGROUNDANDCHILDIN
CHILDRESTRAINTWHENCHECKINGLEVELINDICATOR
Ball MUST be entirely in green zone (fig. f). If
necessary, place rolled towels under child
RESTRAINTATVEHICLESEATCREASEUNTILENTIREBALL
ISINGREENZONE4HENRECHECKLEVELINDICATOR
DO NOT use tether
rear-facing4ETHERmust
BESTOREDSEEh4ETHER3TORAGEvPAGE
0ERFORMTHISTESTEVERYTIMEYOUDRIVEWITHYOUR
child.
