PRO™ Xs2, PRO™ Xs3, PRO™ Xs4
6
WARNING 警告
Equipment Misuse Hazard
Equipment misuse can cause the equipment to
rupture, malfunction, or start unexpectedly and
result in a serious injury.
• Read all manuals, tags, and labels before
operating the equipment.
• Use equipment only for its intended purpose.
• Do not alter or modify equipment.
• Do not exceed the maximum working pres-
sure of the lowest rated system component.
Maximum working air and fluid pressure of
this equipment is 100 psi (0.7 MPa, 7.0 bar).
• Wear hearing protection.
設備誤用危險
誤用設備會導致設備破裂、工作不正常、或意外
啟動，導致嚴重損傷。
• 在操作設備之前，要閱讀所有的手冊、標簽
及標志。
• 只能將設備用於其預定的用途。
• 不要對設備進行改動或修改。
• 不要超過額定值最低的系統部件的最大工作
壓力。該設備的最大工作空氣和流體壓力為
100 psi (0.7 MPa, 7.0 bar)。
• 請戴好聽力保護裝置。
Toxic Fluid Hazard
Hazardous fluids or toxic fumes can cause a seri-
ous injury or death if splashed in the eyes or on
the skin, swallowed, or inhaled.
• Know specific hazards of the fluid you are
using. Read fluid manufacturer’s warnings.
• Wear appropriate protective clothing, gloves,
eyewear, and respirator.
中毒危險
如果吞食有毒的溶液、吸入有毒的煙霧或讓它們
濺到眼睛裏或皮膚上，都會導致嚴重傷害或死
亡。
• 應熟悉所用溶液的特殊危險性。閱讀溶液生
產廠家的警告。
• 穿戴適當的防護衣、手套、護目鏡及呼吸器。
Pressurized Equipment Hazard
Spray from the gun, hose leaks, or ruptured com-
ponents can splash fluid in the eyes or on the
skin and cause serious injury.
• Follow Pressure Relief Procedure, page
25, when you stop spraying and before
cleaning, checking, or repairing equipment.
• Check hoses and couplings daily. Tighten all
fluid connections before each use.
高壓設備危險
從噴槍、軟管泄漏處、或破裂的部件噴出的射
流，會使液體濺入眼內或皮膚上，導致嚴重的損
傷。
• 在停止噴塗時以及在清洗、檢查或修理設備
之前，要按照
壓力釋放步驟
進行 （第 25 頁
)
。
• 每天都應檢查軟管和接頭。每次使用前都要
擰緊所有流體連接處。
