6
Contents
Before usage
Installlation
FAQ * After service
Features
Installation
FAQ
Parameters
Dimension figure
Packing list
6
Attention
Usage
Schematic diagram
5
6
Packing List
Gasket
User's
manual
1
Expansion
bolt
4
2
Safety
valve
1
Electric
water
heater
1
Name
Quantity
4
After installation, be sure to fill the tank with water before switching on the
power. The receptacle of water heater shall be set to places beyond the water
spraying. Never plug or pull the power plug with wet hand. If the power cord
is damaged, be sure to have it replaced by appointed maintenance.
In cold area, if the water heater is idle for long period in winter, please pull
the safety valve to discharge the water to avoid freezing.
The shell of the water heater is all plastic. To clean the shell, please wipe it
gently with wet cloth and neutral detergent. Do not use petrol or other
solvent.
In case of breakdown, please contact us or the appointed maintenance to
resume normal usage as soon as possible.
See to the physical product for the appearance, color or pattern.
Phenomenon
Please check
How to solve
No water output
Cold
water
output
only
Is water supply failed or water pressure too low?
Is water exit blocked? Is hot water valve opened?
Heater breakdown
Is the power switched on?
Is there temperature regulator breakdown?
Heating indicator is on
Heating indicator is off
The heating indicator keeps on
Unstable quantity and temperature
with water output
Is the tap water input pressure stable?
Is there temperature regulator breakdown?
The set water temperature is not reached yet
Check and clear
Contact the maintenance
Switch on the power
Continue heating
Contact the maintenance
Contact the maintenance
Make check
Make check
FAQ
