A SERVICE OF

logo

INSTALLATION INSTRUCTIONS
5. With assistance, mount dryer on wall brackets. See Fig.4.
6. A second control panel with inverted symbols is supplied.
Peel the release paper from the back of inverted film then
place new control panel film on the surface so that the writing is the
correct way around.
11
Fig.4
Extra Dry
Normal
Off
100min
60min
30min
Start/Pause
HDY-D60
30min
60min
Air DryHeat Dry
6kg Sensor Dryer
Caution
Plug must be accessble after installation.
Stacking installation
You can use a stacking kit (included as an accessory) if you want to mount your dryer
on the top of a Haier front load washing machine, ensure the washer is the same
width as the dryer.
1. Remove 4 screws among screws on the bottom panel (see fig.1), and install the
stacking kit on the bottom panel (see fig.2).
4 Screws
stacking kit
Fig.1
Fig.2