BDS
37
ENGLISH
Specifications
SAT-TS60 Satellites
(BDS 800 and BDS 400 systems)
CEN-TS60 Center
(BDS 800 system)
Midrange transducer: Two x 3" (75mm) flat-panel drivers, video-shielded Two x 3" (75mm) flat-panel drivers, video-shielded
High-frequency transducer: 1" (25mm) CMMD® Lite dome, video-shielded 1" (25mm) CMMD Lite dome, video-shielded
Recommended power: 10 – 120 watts 10 – 150 watts
Impedance: 8 ohms 8 ohms
Sensitivity: 86dB (2.83V/1m) 83dB (2.83V/1m)
Connector type: Push-spring terminal Push-spring terminal
Enclosure type: Sealed Sealed
Dimensions (H x W x D): 299mm x 110mm x 88mm
(11-25/32" x 4-11/32" x 3-15/32")
(Height measurement includes removable stands)
110mm x 272mm x 88mm
(4-11/32" x 10-11/16" x 3-15/32")
Weight: 1.5kg (3.3 lb) 1.5kg (3.3 lb)
SAT-TS11 Satellites
(BDS 300 system)
CEN-TS11 Center
(BDS 700 system)
SAT-TS7 Satellites
(BDS 700 system)
Midrange transducer: Two x 3" (75mm) cones, video-shielded Two x 3" (75mm) cones, video-shielded 3" (75mm) cone, video-shielded
High-frequency transducer:
3/4" (19mm) dome, video-shielded 3/4" (19mm) dome, video-shielded 1/2" (13mm) dome, video-shielded
Recommended power: 10 – 120 watts
10 – 120 watts 10 – 80 watts
Impedance: 8 ohms 8 ohms 8 ohms
Sensitivity: 86dB (2.83V/1m) 86dB (2.83V/1m) 86dB (2.83V/1m)
Connector type: Push-spring terminal Push-spring terminal Push-spring terminal
Enclosure type: Sealed Sealed Sealed
Dimensions (H x W x D): 243mm x 100mm x 92mm
(9-9/16" x 3-15/16" x 3-5/8")
102mm x 241mm x 92mm
(4" x 9-1/2" x 3-5/8")
167mm x 100mm x 92mm
(6-5/8" x 3-15/16" x 3-5/8")
Weight: 1.0kg (2.2 lb) 1.0kg (2.2 lb) 0.6kg (1.3 lb)
SB 10 Soundbar
(BDS 600 system)
Low-frequency transducer
Left:
Right:
Center:
3" (76mm) paper cone, video-shielded
3" (76mm) paper cone, video-shielded
Two 3" (76mm) paper cones, video-shielded
High-frequency transducer
Left:
Right:
Center:
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
3/4" (19mm) silk dome, video-shielded
Recommended power
Left and Right:
Center:
60 watts (each)
100 watts
Impedance: 8 ohms
Sensitivity: 84dB (2.83V/1m) (
each channel)
Connector type: Push-spring terminal
Enclosure type: Sealed
Dimensions (H x W x D): 110mm x 920mm x 89mm
(4-5/16" x 36-1/4" x 3-1/2")
Weight: 3.67kg (8.1 lb)
HKTS200SUB and HKTS210SUB
Subwoofer (all systems)
Low-frequency transducer: 8" (200mm) down-firing cone
Amplifier power: 200 watts
Frequency response: 45Hz – 200Hz (–6dB)
Controls: Volume, phase, bass boost
Connections: LFE input, left and right RCA line-level inputs
Enclosure type: Sealed
Power requirement: 120V, 60Hz (USA)
220V – 240V, 50/60Hz (EU)
Power consumption: <1W (standby); 200W (maximum)
Dimensions (H x W x D): 353mm x 267mm x 267mm
(13-29/32" x 10-1/2" x 10-1/2")
(Height measurement includes feet)
Weight: 9.0kg (19.8 lb)
