HP Jetdirect Configuration Page Messages 8-15
Config. Page
Messages
8
TFTP RETRIES
EXCEEDED
The overall retrying of the TFTP transfer of the
configuration file from the host to the HP Jetdirect
print server has exceeded a retry limit.
TOTAL PACKETS
RECEIVED:
TOTAL PACKETS
RCVD:
Total number of frames (packets) received by the
HP Jetdirect print server without error. This includes
broadcast, multicast packets, and packets specifically
addressed to the print server. This number does not
include packets specifically addressed to other nodes.
TRANSMIT ERROR Check the network topology and verify all cable
segments.
TRYING TO
CONNECT TO
SERVER
The HP Jetdirect print server is trying to connect to
the print server or NetWare file server after being
configured. Wait for the print server to establish a
connection with the print or file server.
TURN PRINTER
OFF/ON
This message may appear after you upgrade to a new
version of firmware. When this message appears, turn
the printer off, then back on to enable any new
functionality that was recently downloaded.
UNABLE TO
ATTACH TO
QUEUE
A failure was detected when the HP Jetdirect print
server tried to attach to one of the queues assigned to
the print server object. This may be because no servers
are allowed to attach to this queue. There may also be
a networking or security problem. Use PCONSOLE to
make sure that servers are allowed to attach to the
queue, to delete the print server object from the list of
queue servers if you want the HP Jetdirect print server
to service other queues, or to delete the queue and
create a new one (the print server object must be added
to the list of queue servers).
When the HP Jetdirect print server is configured for
multiple file servers, the error is only displayed on the
configuration page (also called a self-test page or
configuration plot) if none of the file servers made the
connection.
Table 8.2 General HP Jetdirect Messages (12 of 15)
Message Description
0Book-asF01.book Page 15 Tuesday, August 14, 2001 2:06 PM
