Troubleshooting
20
3
Load Tray #
[Paper Size]
There is no paper left in this
tray.
Load paper into the tray indi-
cated.
Memory Overflow
Job Incomplete
A memory overflow has oc-
curred.
Add memory to the printer.
Memory Full
Job Incomplete
A memory full has occurred. Add memory to the printer.
Offline The printer is offline. The
printer cannot accept or print
out data.
If you want to put the printer
online, press {
{{
{On Line}
}}
}.
Printing... The printer is printing. Wait for a while.
Print Overrun
Job Incomplete
A print overrun occurred on a
file being printed. Only a part
of the data on the page will be
printed, and the print job is
suspended, or the current
print job has been canceled.
To print the image correctly,
add memory to the printer or
simplify the actual data size.
Set "Page Protect" to "On" on
the printer driver. Be sure to
return "Page Protect" to "Au-
to" after the print job. With
"Page Protect" "On", the print-
er performance might be de-
creased. While using the
PostScript printer driver, low-
er the resolution setting.
Processing... The printer is processing in-
ternally.
Wait for a while.
Ready The printer is online and
ready to print.
If you want to set the printer
offline, press {
{{
{Online}
}}
}.
Remove Paper From Duplex
Unit
There is still paper in duplex
unit.
Remove the paper from du-
plex unit.
Resetting Job... The print job is being reset. Wait for a while.
Reset Tray #
Correctly
The input paper tray is not set
correctly.
Set the input paper tray cor-
rectly.
Toner is Almost Empty Toner is almost running out. Replace the toner soon to pre-
vent poor print quality.
Waiting... The printer is waiting for the
next print job.
Wait for a while.
Warming Up... The printer is warming up or
toner is being supplied.
Wait until the panel display
change to "Ready".
Messages/Second messages Description Solution
