A SERVICE OF

logo

Open as PDF
next previous
Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Classifiers To Configure Quality of Service for Outbound Traffic
For example, suppose that you want to prioritize inbound traffic on the
following source-ports:
Source-Port Priority
A1 - A3 2
A4 3
B1, B4 5
C1-C3 6
You would then execute the following commands to prioritize traffic received
on the above ports:
Figure 15-26. Configuring and Displaying Source-Port QoS Priorities
If you then decided to remove port A1 from QoS prioritization:
In this instance, No-
override indicates that port
A1 is not prioritized by QoS.
Figure 15-27. Returning a QoS-Prioritized VLAN to “No-override” Status
15-46