A SERVICE OF

logo

Installing the HP KVM Server Console Switch G2 6
Installing the HP KVM Server Console Switch G2
Overview
The HP KVM Server Console Switch G2 ships with rack-mounting brackets for easy integration into the
rack. Stabilize the rack in a permanent location before installing the equipment. Avoid uneven loading or
overloading of the rack cabinets.
Installation checklist
Before installation, refer to the following lists to be sure that all of the listed components were received.
Console switch kit contents
Console switch
Power cords
Rack mounting kit
Serial cable
Documentation kit
This kit might contain extra hardware for your convenience.
Required items not included
Interface adapters
One interface adapter is needed for each server or device.
o USB
o PS2
o Serial
o HP BladeSystem
UTP CAT 5 cable or higher
Required tools
The following tools are required for some procedures:
Phillips screwdriver
Cage nut insertion tool (included with your original rack hardware kit)