A SERVICE OF

logo

Open as PDF
next previous
Removal and replacement procedures 29
Remove the processor memory drawer
To remove the component:
1. Power down the server (on page 26).
2. Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
("Processor memory drawer shipping screw locations" on page 28).
3. Release the latches on the release lever.
4. Lower the handle, and then extend the processor memory drawer from the server until the release
latches catch.
WARNING: The processor memory drawer weighs more than 11.3 kg (25.0 lb). Use extra
caution when removing and replacing the processor memory drawer.
5. Firmly holding the processor memory drawer, press the release buttons and then remove the drawer
from the server.