basics guide
set the defaults on your printer
21
unmark camera-selected photos
After printing camera-selected photos from your printer, a message appears on
the LCD screen asking if you want to unmark the photos. You can change this
setting so that the printer will automatically unmark your photos, never unmark
your photos, or ask if you want to unmark your photos.
1 On the printer’s control panel, press the M
ENU button.
2 Press the S
ELECT PHOTOS button until Preferences appears highlighted
on the LCD screen, and then press the OK button.
3 Press the S
ELECT PHOTOS button until Camera selections appears
highlighted on the LCD screen, and then press the OK button.
4 Select from the following:
– Always if you want the printer to unmark the camera-selected photos
after printing
– Never if you want the printer to leave the camera-selected photos
marked after printing
– Ask if you want the printer to ask each time after you print camera
selected photos
5 With your selection highlighted on the LCD screen, press the OK button.
revert to the factory default settings
If you made adjustments to the default settings, you can reset the printer to the
original factory settings at any time. To revert to the factory default settings,
follow these steps.
Note: The language and country/region settings you chose will not change
if you revert back to the factory default settings.
To revert to the factory default settings:
1 On the printer’s control panel, press the M
ENU button.
2 Press the S
ELECT PHOTOS button until Preferences appears highlighted
on the LCD screen, and then press the OK button.
3 Press the S
ELECT PHOTOS button until Restore defaults appears
highlighted on the LCD screen, and then press the OK button.
4 Press the S
ELECT PHOTOS button to highlight Yes or No, and then press
the OK button.
set LCD screen language and country/region
Use the Language option to change the language of the LCD screen prompts on
the printer. The country/region setting also determines what photo and paper
sizes the printer’s LCD screen displays. To change the language and country/
region settings on your printer, follow these steps.
