A SERVICE OF

logo

Chapter 5 Problem Solving 258
Correcting Output Quality Problems
### 9. Adjust the toner density
setting.
## 10. Change the fuser mode
setting (page 160
). Check
that the orange packing
spacers are removed from
the fusing area.
# 11. Redistribute the toner
in the toner cartridge
(page 195
).
# #### ## 12. Install a new HP toner
cartridge. (See instructions
provided with the toner
cartridge.)
Light Print or Fade
Specks
Dropouts
Lines
Gray Background
Toner Smear
Loose Toner
Repeating Defects
Misformed Characters
Page Skew
Curl or Wave
Wrinkles or Creases
Troubleshooting Steps
(Follow the steps in the
order they are listed.)