edge switch 2/16 service manual 1–45
General InformationI
• Standard flat-tip and cross-tip (Phillips) screwdrivers - Screwdrivers are
required to remove, replace, adjust or tighten various connector or chassis
components, and to remove and replace power supplies.
• Maintenance terminal (desktop or notebook PC) - the PC is required to
configure switch network addresses and acquire event log information through the
maintenance port. The PC must have:
— The Microsoft Windows 98, Windows
2000, or Windows Millennium Edition
operating system installed.
— RS-232 serial communication software (such as ProComm Plus™ or
HyperTerminal) installed. HyperTerminal is provided with Windows
operating systems.
• Fiber-optic cleaning kit - The kit contains tools and instructions to clean
fiber-optic cable, connectors, loopback plugs, and protective plugs.
