27
Advanced Printing Procedures (Windows)
If your program is not listed, refer to a section on a similar program.
CorelDRAW 8
1. From the HP DesignJet 500PS Print Monitor click Setup>Setup Properties. Then
click the Print tab.
2. Make sure the Perform Color Correction checkbox has a check in it.
3. In the ICC input profile area, select appropriate CMYK and RGB profiles. If you know
which profiles your application is using, select that profile. If you don’t, use the default
setting.
4. For the ICC output profile, select the appropriate ink/media combination. Also select
a rendering intent to use. Click the Info button to see a full description of the selected
profile.
5. Click OK in the Setup Properties dialog box.
6. In CorelDRAW, select Print Setup. Select your printer from the ‘Name’ field.
7. Click the Properties button. Choose a page size from the Paper field or select
Custom Page for a custom page size.
8. If you choose a Custom Page, click on the Custom button and enter the custom size
in the paper width and height fields. The paper size should match the size entered in
Corel.
9. Click OK in the Printer Properties dialog.
10. Click OK in the Print Setup dialog.
11. Click File>Print. Then select your printer from the Name menu.
12. Select the PostScript tab and then select PostScript3 and uncheck Output Bitmaps in
RGB.
13. Select the Miscellaneous tab and uncheck Use Color Profile.
14. Click Print.
Illustrator 7
The Kodak Color Management System must be installed to output successfully from
Illustrator 7 to HP DesignJet 500PS Software.
1. From the HP DesignJet 500PS Print Monitor click Setup>Setup Properties. Then
click the Print tab.
2. Make sure the Perform Color Correction check box has a check in it.
3. Click OK in the Setup Properties dialog.
4. In Illustrator, go to File>Document Setup.
5. Select ‘Use printers default screen.’
6. Select ‘Use Print Setup’.
7. Click the Print Setup button. Print Setup screen appears.
8. Select your printer in the Name field.
9. Click the Properties button.
