17
Why does my backlight
keep turning off?
The default settings on your HP iPAQ turn off the backlight after
30 seconds of inactivity. This is the default setting to conserve
your battery life.
If you want the backlight to stay on for a longer period of time,
increase the amount of time the backlight stays on if not in use in
the backlight settings. From the Start menu, tap Settings >
System tab > Backlight icon.
NOTE: Changing the settings to leave the backlight on for
longer periods decreases your battery life.
Why does my screen
freeze, respond slowly, or
doesn’t respond?
Sometimes, your device freezes because there are too many
applications accessing the central processing unit. Often this
may be due to the installation of additional third party software.
Perform a soft reset on your HP iPAQ to see if this remedies the
issue. Refer to the information on Resetting Your Device for
more details.
If the problem persists, perform a hard reset.
Question Answer
430524-001.book Page 17 Tuesday, May 2, 2006 2:05 PM
