Managing the workstation blade 58
2.
Click Save in the upper right corner of the tab.
3. Select Save to the floppy or Save to USB key.
4. Enter a file name in the File Name box, and then click the Save button. An html file is saved on the
diskette or USB drive key.
5. Print the information from the diskette or USB drive key.
To exit HP Insight Diagnostics, click Exit in the upper-right corner of the screen, and then remove the
Documentation and Diagnostics CD from the optical drive.
Downloading the latest version of HP Insight Diagnostics
1. Go to http://www.hp.com (http://www.hp.com).
2. Click the Support & Drivers link.
3. Select the Download driver and software radio button.
4. Enter your product number (for example, WS460c) in the text box, and then press the Enter key.
5. Select your operating system.
6. Click the Diagnostic link.
7. Locate HP Insight Diagnostics, and then click Download.
The download includes instructions for creating a bootable CD.
ROM-Based Setup Utility
The RBSU enables BIOS parameters to be changed during the boot process. For example, Remote
Console Mode is set using RBSU. For details on RBSU options, see the HP ROM-Based Setup Utility User
Guide on the HP website http://www.hp.com/support/xw460c (http://www.hp.com/support/xw460c
).
You must make the following RBSU settings:
• HP Graphics Expansion x16 mode--This mode is enabled only with a WS460c Graphics Expansion
Blade. This mode enables the PCIe Generation 2 x16 connections between the blade and the
graphics adapters. This mode is disabled for workstation blades without the Graphics Expansion
Blade.
To set HP Graphics Expansion x16 mode, select System Options>HP Graphics Expansion x16 mode.
o If you are using the Graphics Expansion Blade, click Enable.
o If you are not using the Graphics Expansion Blade, click Disable.
• PCIe Generation 2—This setting is enabled only with a WS460c Graphics Expansion Blade. This
setting enables the Graphics Expansion Blade to work at a higher level than the PCIe Generation 1
setting.
To set PCIe Generation 2, select Power Management Options>Advanced Power Management
Options>PCI Express Generation 2.0 Support>Force PCIe Generation 2.
Power-on Self Test
At power-on, the workstation blade performs POST.
