A SERVICE OF

logo

Open as PDF
next previous
Table 20 AddVolumeSetting Tag Parameters
Number of
Characters
Range of ValuesSettingParameterColumn in
Spreadsheet
Layer
Information about external volumes and the primary pathFirst layer
5 decimal digits or
fewer
0 to 63231Path group
number
PathGroupA
2 digits or fewer1A to GRPort number of
the primary path
PortB
16 hexadecimal
digits
000000000000000
to
FFFFFFFFFFFFFFFF
WWN of the
primary path
WWNC
4 hexadecimal
digits or fewer
0000 to 0FFFLU number set to
the external
volume
LUND
Grp: 5 decimal
digits or fewer
VPG: 4 decimal
digits or fewer
Grp: 1 to 16384
VPG: 1 to 4096
External volume
group number
and its sequential
number. The
format should be
EGrp-VPG (for
example,
E16384-4096).
ExGE
N/A
• Normal
• R-CMD
• Normal:
Maps an
external
volume
• R-CMD: Maps
a command
device
AttributeF
2 decimal digits or
fewer
0 to 31CLPR that is used
to access the
external volume
CLPRG
16 characters or
fewer in ASCII
format
N/AEmulation type of
the external
volume. Write the
same characters
as the emulation
type shown in
“LDEV Capacity
Information for
Each Emulation
Type” (page 154).
EmulationH
N/A
• Enable
• Disable
• Enable: Sets
cache mode
to Enable.
• Disable: Sets
cache mode
to Disable.
CacheModeI
N/A
• Enable
• Disable
• Enable: Sets
inflow control
to Enable.
• Disable: Sets
inflow control
to Disable.
InflowControlJ
Mapping External Volumes 107