31
Time Zone setting mode (the Time Zone data is provided on P.)
• Set the Time Zone by pressing UP or DOWN arrow button to adjust the time in 30 min
intervals. Press and hold either button for quick digits advance
• Press SET button to confirm selection – the “DST no” will flash prompting to set the
Daylight Savings Time option
• Press UP arrow button to enable and DOWN to disable the DST option
• Press SET button to confirm selection and the year digits will flash
• Continue setting the year, month, day, calendar format (day/month or month/day), time
format (12 or 24 hours), local hour and minutes, using the same technique
After programming is complete the display will return to the default Time Window.
Note: Press and hold SET button anytime during the setup to return to the default Time Window
and all previous settings will be cancelled
.
Clock and Calendar Modes
In the Time Window press SET button each time selecting either:
• Hour and Minutes with the Day of the week
• Hour and Minutes with the City code
• Hour and Minutes with the Seconds
• Month with the day and a year
• Hour and Minutes for UTC (Coordinated Universal Time)
Activating or deactivating alarms
• Press the ALARM/CHART button to display the Weekday Alarm (W), Single Alarm (S) or
Ice Warning Alarm (Pre-Al) time. If these alarms are not set, the abbreviation OFF will be
displayed
• To enable or disable any of these alarms, press UP or DOWN arrow button
Note: Press SET button anytime during alarm selection mode to return to the default clock display.
.
Programming Alarms
• In the Time Window, press the ALARM/CHART button selecting the desired alarm- W,
S or PRE-AL
• Press and hold ALARM/CHART button until the hour digit will flash
• Set the alarm hour using the UP or DOWN arrow button. Press and hold either button for
quick digit advance.
• Press ALARM/CHART button to confirm selection
• Set the alarm minutes using UP or DOWN arrow button. Press and hold either button for
quick digit advance
• Press ALARM/CHART button to confirm selection – the snooze interval digits will flash
• Set a Snooze interval (all three alarms share same snooze time duration) using UP or
DOWN
arrow button. Press and hold either button for quick digit advance
