A SERVICE OF

logo

Open as PDF
next previous
7
GB
To avoid all risk, if the power cable becomes damaged,
it must only be replaced by the manufacturer,
by an authorised service centre, or by a qualified
electrician.
Adaptation to various types of gas (Fig. 5)
Should the appliance be pre-set for a different type of
gas than that available, proceed as follows:
• replace the injectors (Fig. 5) with the corresponding
type of gas to be used (see table “Uses
characteristics”).
• to adjust to the minimum, use a screwdriver on the
screw placed on the tap (Fig. 6) after turning the tap
to its minimum position. For LPG (butane/propane)
screw tight
Fig. 6
wok C3 only
Fig. 5
USER CHARACTERISTICS
GAS BURNERS
FEED BURNER Ø INJECTORS
THERMAL CAPACITY
TYPE
PRESSURE mbar
NOMINAL
CONSUMPTION
NORM. 1/100 mm W
natural gas G20 20
fast 129 3000 286
l/h
auxiliary 77 1000 95
wok 3 141 3500 333
liquefied gas
G30/G31 28-30/37
fast 87 3000 218
g/h
auxiliary 50 1000 73
wok 3 94 3500 254