A SERVICE OF

logo

FEATURES OF YOUR OVEN CONTROL
(!)
CLEAR
OFF
u~M””LJy)jfr#!r+i15Mu!lof
I
o
BAKE
0,
BROIL
o
~-
CLEAN LOCK
N
h
(b
&
&
1.
CLEARK)FF.
Press this
pad
to
cancel
all
oven
operations except clock
and
timer.
2. PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed
at
any
time by pressing
the pad of the operation you
want to see. For example, you can display the
current time
of day while the timer is counting
down by pressing the CLOCK pad.
3. TIME DISPLAY. Shows the time
of day,
the times set for the timer or automatic
oven operation.
4. OVEN TEMPERATURE AND BROIL
DISPLAY. Shows the oven temperature or the
broil setting selected.
5. FUNCTION INDICATORS. Lights up to show
whether oven is in bake, broil or self-clean mode.
6. INCREASE. Short taps to this pact increase
time or temperature by small amounts. Press
and hold pad to increase time or temperature by
larger amounts.
7. DECREASE. Short taps to this
pad
decrease
time or temperature by
small
amounts. Press and
hold pad to decrease time or temperature by
larger amounts.
8. BAKE. Press this pad to select bake function.
9. BROIL. Press this pad to
select
broil function.
10. CLEAN. Press this
pad
to select self-c
leaninx
function. See
Self-Cjeaning
Instructions.
-
11. COOK TIME. Press this pad
for
Time Bake
operations.
12. STOP TIME. Use this pad along with COOK
TIME or CLEAN pad to set the oven to start
automatically at a time you select.
13. CLOCK. To set clock, first press CLOCK pad.
Then press the INCREASE or DECREASE pad
to change the time
of day. Press the CLOCK pad
to start.
14. TIMER. Press this pad to select timer function.
The timer does not control oven operations. The
timer can time up to 9 hours
and
55 minutes.
To set timer, first press TIMER pad. Then press
the INCREASE or DECREASE pad to change
the time.
If “F-” and a number flash on display and the
control beeps, this indicates function error code.
If function error code appears during the self-cleaning
cycle, check oven door latch. The latch handle may
have been moved, even if only slightly, from the
latched position. Make sure the latch is moved to
the right
as
far as it will go. Press the CLEAR/OFF
pad. Allow oven to cool for one hour. Put oven
back into operation.
If
function error code repeats.
disconnect power to the range and call for service.
10