A SERVICE OF

logo

01/05 P/N 211022
13
5.
6.
Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with
spacers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole
(6) section to tank and wheel carriage as shown. A deep socket is recommended.
8
7
6
Install rod (7) through holes in bottom pole section (6) and
eyebolt (8).
2
17
17
3
3
19
9
6
8
7
THE SPACER () WILL FIT
LOOSELY UNTIL
SECURED INTO THE
CAVITY OF THE BASE.
IMPORTANT!:
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
DO NOT OVER
TIGHTEN
IMPORTANT!: