English – 35
TECHNICAL DATA
Technical data
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under
various working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved
cutting equipment fitted. The table indicates the highest and lowest values.
355FX 355FXT 355RX 355FRM
Engine
Cylinder displacement, cu.in/cm
3
3,25/53,3 3,25/53,3 3,25/53,3 3,25/53,3
Cylinder bore, inch/mm 1,77/45 1,77/45 1,77/45 1,77/45
Stroke, inch/mm 1,32/33,5 1,32/33,5 1,32/33,5 1,32/33,5
Idle speed, rpm 2800 2800 2800 2800
Recommended max. speed, rpm 13000 13000 12000 12000
Speed of output shaft, rpm 10500 10500 10500 10500
Max. engine output, acc. to ISO 8893, kW/ rpm 2,8/9000 2,8/9000 2,8/9000 2,8/9000
Catalytic converter muffler No No No No
Ignition system
Manufacturer/type of ignition system Walbro MB Walbro MB Walbro MB Walbro MB
Spark plug NGK BPMR 7A NGK BPMR 7A NGK BPMR 7A NGK BPMR 7A
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor Walbro WT Walbro WT Walbro WT Walbro WT
Fuel tank capacity, US pint/litre 2,3/1,1 2,3/1,1 2,3/1,1 2,3/1,1
Weight
Weight without fuel, cutting attachment and guard,
Lbs/kg
19,6/8,9 20,1/9,1 20,3/9,2 20,3/9,2
Sound levels
(see note 1)
Equivalent sound pressure level at the user′s ear,
measured according to ANSI B175.3-2003, dB(A),
min/max:
103/106 103/106 101/108 101/108
Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-2003, m/s
2
At idle, left/right handles, min.: 2,3/2,7 2,3/2,7 1,4/1,5 1,8/1,5
At idle, left/right handles, max.: 2,3/2,7 2,3/2,7 1,8/1,8 2,2/2,1
At max. speed, left/right handles, min.: 1,7/1,7 1,7/1,7 1,2/1,4 1,2/1,3
At max. speed, left/right handles, max.: 2,7/2,3 2,7/2,3 1,9/2,3 2,4/1,9
